Reset a Router or 3-in-1 to Factory Default

Pace 3-in-1, Arris 3-in-1, E1000, E1200, EA2500, EA2700 and EA2750

1. With the Gateway powered on, press and hold the reset button for at least 30 seconds


2. Continue to hold the reset button while you remove the power cord from the back of the Gateway


3. Continue holding the reset button and plug the power cord back in, then release the reset button

WRT54G and WGC200

1. Open a web browser and type http://192.168.1.1 in the address bar and hit Enter


2. Enter the Username and Password, then click OK
    
   • Username: leave this space blank
   
   
   • Password:  admin 
   
   
3. Go to Administration, then click the Factory Defaults link


4. Select Yes on Restore Factory Defaults and click Save Settings

BEFCMUH

1. Open a web browser and type http://192.168.0.1 in the address bar and hit Enter


2. Enter the Username and Password, then click OK
    
   • Username: leave this space blank
   
   
   • Password:  admin 
   
   
3. Click on Status, then click the Security tab


4. Select Yes for Restore Factory Defaults and click Apply